Introduction and Planning Guide

Physical Specifications

The dimensions of the IBM 2212 are as follows:

Width

440 mm (17.3 in.) without rack-mounting flange

480 mm (18.9 in.) with rack-mounting flange

Depth

305 mm (12 in.)

Height

Models 1xx: 44.4 mm (1.75 in.), or 1U

Models 4xx: 89 mm (3.5 in.), or 2U

Weight

Models 1xx weigh approximately 4.54 kg (10 lb) when fully populated.

Models 4xx weigh approximately 8 kg (18 lb) when fully populated

Service Clearances

You must leave free space for service around the machine as follows:

Front

750 mm (30 in.)

Sides

For Models 4xx: 3 in.

Rear

• For Models 1xx: 3 in.
• For Models 4xx: 3 in.

Airflow

A blower and a fan are installed in each unit and can generate the following airflow:

• IBM 2212 Models 1xx: 0.24 m³/min.
• IBM 2212 Models 4xx: 0.50 m³/min.

Operating Environment

Temperature

10°C to 40°C (50°F to 105°F)

Relative Humidity

8% to 80%

Max Wet Bulb

27°C (80°F)

Altitude

2133 meters (7000 feet)

Lightning Protection

The power supplies of the IBM 2212 are protected against lightning.

Contact an electrical contractor to determine if lightning protection is needed for your power distribution system.

CPCI Adapter Specifications

Compact Peripheral Component Interconnect (CPCI) adapter slots are 5.25-in (133 mm) wide for 3U adapters. CPCI adapter slots are 10.5-in (266 mm) wide for 6U adapters.